Kramer Electronics WP-501 - Manual (Page 92)

K-Config – Using the Triggers 87
10. Select Timer Trigger State Start and click Add to List:
Figure 153: Timer Events – Selecting the Timer Start/Stop Action (Start State Selected)
The button trigger includes powering on the projector and starting the Timer Trigger. The Timer trigger actions will be
executed within 5 seconds unless they are interrupted by the monitor event.
Figure 154: Timer Events – Active Button Trigger Action List
Step III: Define the Monitor Event
11. Add a monitor event trigger and select the On reply from On command:
Figure 155: Timer Trigger – Add the Monitor Event