7 clear configuration from device, Clear configuration from device – Kramer Electronics WP-501 User Manual
Page 136
Advertising
K-Config
–
Connecting to the Device
131
4.
Click OK.
Read is in Process:
Upon completion, the following message appears:
The Device configuration is now uploaded to the PC.
10.7
Clear Configuration from Device
To clear the device configuration:
1.
Connect the PC to the Master or the standalone room controller.
2.
Click the Connect button (or select Connect from the Device menu list).
3.
In the Device menu, select Clear Configuration from Device.
The following message appears:
Advertising