Kramer Electronics WP-501 - Manual (Page 22)

K-Config – Getting to Know K-Config 17
4.3 The K-Config Menus
This section describes the K-Config menus.
4.3.1 The File Menu
This section defines the File Menu:
Figure 27: The File Menu
Menu Command Function
New Project Click to create a new project, see Section 4.3.1.1
A project includes the configuration as well as the
drivers
Open Project Open an existing project, see Section 4.3.1.2
Save Project Click to save the current project, see Section 4.3.1.3
Save Project As Save the project under a different name
Auto Save Project You can choose to save the project automatically (yes)
or not (no)
Export Configuration For using batch configuration upload feature with Site-
CTRL
When exporting a configuration, the file name
automatically includes the master room controller
name and the date it was saved. For example,
SL-10-Configuration-Sep10.kpt
Set Working Directory Click to set the working directory
You can change the working directory any time
Driver Manager Click to open the Driver Manager window
Import Devices Click to import a new or existing devices XML, see
Section 4.3.1.4
You can import one or several new and/or revised
device layouts to K-Config and virtual device layouts
created in other K-Config installations
Export Device Click to export a device, Section 4.3.1.4
You can export virtual device layouts to other
K-Config installations or to the K-touch virtual device
screen designer system
Recent Projects Click to display the recent projects you have been
working on.
Note that recent projects will not be saved when
installing a new software revision
Exit Click to exit the program
4.3.1.1 Starting a New Project
To start a new project, do the following:
1. Select New Project in the File menu, the following window appears (if you are not using K-Config for the first
time):
Figure 28: New Project Warning