Hale 80FC - Manual (Page 11)

11 Pump Ends
p/n: 029-0020-61-0
Saf ety
❑
1 Safety Precautions
IMPORTANT !
HALE PUMP ENDS (SERIES 20* THROUGH 80*) ENGINE MOUNTED PUMPING
SYSTEMS ARE DESIGNED FOR OPTIMUM SAFETY OF ITS OPERATORS.
FOR ADDED PROTECTION, PLEASE FOLLOW THE SAFETY GUIDELINES
LISTED IN THIS SECTION AND ADHERE TO ALL WARNING, DANGER, CAU-
TION AND IMPORTANT NOTES FOUND WITHIN THIS MANUAL.
ALL SUPPLIED DOCUMENTATION (ENGINE, HALE PUMP MANUALS, ETC.)
MUST BE CAREFULLY READ, UNDERSTOOD AND ADHERED TO STRICTLY
BY ALL INSTALLERS AND OPERATORS BEFORE ATTEMPTING TO INSTALL
OR OPERATE ANY PUMPING SYSTEM.
WHEN DEVELOPING DEPARTMENTAL APPARATUS OPERATING PROCE-
DURES, INCORPORATE THE WARNINGS AND CAUTIONS AS WRITTEN.
Hale is a registered trademark of Hale Products, Incorporated. All other brand and product
names are the trademarks of their respective holders.
* For a breakdown of the models/series pump ends in this manual, see
heading “Pump Ends ” on page 19.
NOTICE !
THE PROCEDURES IN THIS MANUAL ARE GENERAL OPERATING PROCE-
DURES. THEY DO NOT REPLACE THE PROCEDURES, POLICIES OR GUIDE-
LINES ESTABLISHED BY THE AUTHORITY HAVING JURISDICTION, NOR DO
THEY REPLACE THE RECOMMENDATIONS AND PROCEDURES PROVIDED
IN THE APPARATUS MANUFACTURER'S MANUAL.
REFER TO THE PROCEDURES PROVIDED BY THE AUTHORITY HAVING
JURISDICTION FOR UNIT LAYOUT AND CONNECTION OF HOSES, VALVES
AND DRAIN COCKS.
ALL FASTENERS ON THE PUMP END ASSEMBLIES ARE SELECTED FOR
THEIR APPLICATION. CLASS1 DOES NOT RECOMMEND REPLACING FAS-
TENERS WITH ANYTHING OTHER THAN CLASS1 PART NUMBERS PRO-
VIDED. REPLACING WITH A WEAKER ALTERNATIVE POSES A SERIOUS
SAFETY RISK.
ALL FASTENERS MUST BE INSTALLED WITH A LOCKING ANAEROBIC
ADHESIVE / SEALANT, SUCH AS LOCTITE
® #242, #246 OR EQUIVALENT.