Hale 80FC - Manual (Page 2)

NOTICE !
Hale Products, Inc. cannot assume responsibility for product failure resulting from
improper maintenance or operation. Hale is responsible only to the limits stated in
the product warranty. Product specifications contained in this manual are subject
to change without notice.
All Hale products are quality components -- ruggedly designed, accurately
machined, precision inspected, carefully assembled and thoroughly tested. In
order to maintain the high quality of your unit, and to keep it in a ready condition, it
is important to follow the instructions on care and operation. Proper use and good
preventive maintenance will lengthen the life of your unit.
ALWAYS INCLUDE THE UNIT SERIAL NUMBER
IN YOUR CORRESPONDENCE.
ECN No REV CHANGE FROM BY DATE APVD
HALE PRODUCTS, INC.
A Unit of IDEX Corporation
Conshohocken, PA 19428 USA
0592 A INITIAL RELEASE LwH 06/11/2007 MAL
WRITTEN BY LwH ISSUE DATE COPYRIGHT ©
NOT TO BE REPRODUCED OR USED TO
MAKE OTHER DRAWINGS OR MACHINERY.
CHECKED BY PW 06/11/2007
Manual p/n: 029-0020-61-0, Rev. -A
Printed in U.S.A. © Hale Products, Inc. 2007
All Rights Reserved