Hale 80FC - Manual (Page 46)

❑ Operation
46 Pump Ends
p/n: 029-0020-61-0
IMPORTANT !
AT INSTALLATION AND BEFORE OPERATION, ALL FLUIDS MUST BE ADDED PER
THE MANUFACTURER’S REQUIREMENTS AND TO THE APPROPRIATE LEVELS.
SEE SEPARATE DOCUMENTATION PROVIDED WITH THE ENGINE AND PUMP
END ASSEMBLIES FOR PROPER FLUIDS TO USE AND QUANTITIES REQUIRED.
Before operation, refill -
❑ Engine crankcase OIL.
❑ Engine WATER coolant (anti-freeze).
❑ Engine battery fluid (ELECTROLYTE).
❑ Pump, gearbox and pedestal OIL.
3.3 PREPARING TO TOW
If your system is trailer mounted, the trailer includes an identification and infor-
mation tag which contains essential information for safe use of your trailer. The
tag is generally located in the tongue area or front cross member of the trailer.
It includes the vehicle identification number (VIN), the maximum gross weight
that each axle can support (GAWR) and the maximum allowable gross weight
of the trailer and its contents (GVWR).
IMPORTANT !
FOR ADDITIONAL TOWING PREPARATION INFORMATION, SEE YOUR SKID AND
TRAILER MANUAL PROVIDED. ALSO SEE THE TRAILER OPERATIONS MANUAL
PROVIDED SEPARATELY WITH YOUR SYSTEM.
3.4 PUMPING OPERATIONS
Initial Start Up
Prior to operating the unit, check for proper:
❑ Engine FUEL level.
❑ Engine OIL level.
❑ Engine COOLANT level.