Hale 80FC - Manual (Page 140)

❑ Lu b ric an t Sp e cific atio n s
140 Appendix C1: Lube Specifications
Hale Series Pumps, October 2006, Rev-D
* For domestic use, Hale recommends using an SAE EP-90, 80W-90 Lubricant or “Roadrunner” Full Synthetic SAE 50 Trans-
mission Lubricant, manufactured by the Eaten ® Corporation, or equivalent.
Grease
Use a Lithium-based grease with 1% to 3% Molybdenum Dissolved, i.e.,
❑ Dow Corning BR2-PLUS ❑ Lubricate-Fiske #3000
❑ Shell Super Duty Grease ❑ Imperial #777
❑ Mobile Grease Special ❑ Sunoco Moly #2EP
Note: For Hale SVS Torrent Stainless Valves see separate manual for additional
lubrication information.
Loctite Sealant
❑ #246 High Temperature Removable Threadlock (or equivalent) -
primarily for gearbox assembly
❑ #242 Medium Strength Threadlock (or equivalent) - primarily for pump
assembly
Oil
See “Appendix C: Alternate Lubricant Manufacturers” on page 137.
Recommended Cleaners
❑ Safety Kleen ® ❑ Stoddard Solvent
IMPORTANT ! The use and disposal of solvents / cleaners must be in
accordance with your local environmental regulations.
APM / AP / CBP
2CBP / CBP2 / CBP3
2CBP2 / 2CBP3 1.75 1.7 SAE EP90
80W-90; 75W-140 Synthetic
(Lubricants must meet service rating API GL-5.)
20FS
30FS 1.75 1.7 SAE EP90
80W-90; 75W-140 Synthetic
(Lubricants must meet service rating API GL-5.)
50FBG / 80FBG
609FBG G 3 2.8 SAE EP90
80W-90; 75W-140 Synthetic
(Lubricants must meet service rating API GL-5.)
Pump Gearbox
Approximate Capacity
Recommended Oil
Quarts Liters
Table C1-2: Oil Capacity and Recommendation