Skid and/or trailer, Pump, gearbox and pedestal, Accessories – Hale 80FC User Manual
Page 54: 2 post-operation, Post-operation
❑ Preventive Maintenance
54
Pump Ends
p/n: 029-0020-61-0
❑
Spark arrestor screen — clean or replacement
❑
Fuel requirements and adding fuel
If required, separate Engine Service Repair Manuals are available from the
engine manufacturer by contacting the engine manufacturer directly.
All engine related service and parts requests should first be directed to
the engine manufacturer. If additional information is needed, contact Hale
Customer Service at telephone number: 610-825-6300.
Skid and/or Trailer
See the Hale Skid and Trailer Service Maintenance manual, supplied with your
unit, for preventive and general maintenance requirements, intervals and
schedules.
Also see the trailer manufacturer’s documentation, supplied with your unit, for
preventive and general maintenance requirements, intervals and schedules for
the trailer assembly, axle, brake system, tires, etc.
Pump, Gearbox and Pedestal
Pump end, gearbox and pedestal preventive and general maintenance require-
ments, intervals and schedules are discussed in this manual.
Accessories
Various Hale accessories / options may be included with your unit, e.g., SVS
valves, P30 or P35 valves, TPM, etc. Refer to the appropriate Hale documenta-
tion, supplied with your unit, for maintenance requirements.
4.2
POST-OPERATION
1.
Inspect the suction hose rubber washers and washers in the suction tube
caps. Remove foreign matter from under these washers. Replace worn,
damaged, or dry washers.
2.
Verify that all discharge valves, booster line valves, drain valves, and cocks
are closed.
3.
Tighten suction caps.
4.
Make sure the gearbox oil reservoir is full to correct level - see heading “To
Check / Add Oil” on page 56.