Caron 6017 - Manual (Page 18)

6010 Series Operations Manual Rev E 2/14/2012 Page 18 of 68
Installing Carboy Water System (BOTL301)
Models 6010, 6015 & 6017 can be purchased with an optional 2.5 gallon carboy water
system. The carboy system is preassembled and shipped inside the chamber. The
four ¼” bolts required to mount the carboy to the unit will be mounted in the right hand
side of the chamber. Remove the carboy assembly from inside the chamber and attach
it to the chamber using the ¼” bolts.
Attach the preassembled tubing provided with the carboy to the water inlet on the rear of
the chamber. Fill the carboy with water as described in the “connecting a water supply”
section of the manual.
¼” Bolts
(4 total)
Tubing connects/
disconnect to
carboy