Caron 6017 - Manual (Page 38)

6010 Series Operations Manual Rev E 2/14/2012 Page 38 of 68
Examples for how to start your timer during day or night modes
Night Start Procedure:
1. Set the timer to SET 1
2. Enter the length of time you would like the lights off (night setting) Example 12 Hrs.
3. Set the timer to SET 2
4. Enter the length of time you would like to have the lights on (day setting) Example
12 Hrs.
5. Determine what time you would like to have the timer change between day/night
6. Example 7:00 P.M. switch to night setting (lights off)
7. At 7:00 P.M. press the RST button on the timer
8. Timer is now set to run with lights off from 7:00 P.M. to 7:00 A.M. and programmed
to turn the lights on from 7:00 A.M. to 7:00 P.M.
Day Start Procedure:
To start the same profile using the example above, follow these steps to start your lights
in day mode
1. Set the timer to SET 2
2. Enter the length of time you would like to have the lights on (day setting) Example
12 Hrs.
3. Change SET 1 from 12 Hrs. down to 1 minute
4. At 6.59 A.M., Press the RST button
5. The timer will start and the lights will be off for 1 minute
6. Once the lights turn on, change the SET 1 from 1 minute to 12 Hrs
Do NOT press the RST button