Caron 6017 - Manual (Page 28)

6010 Series Operations Manual Rev E 2/14/2012 Page 28 of 68
Changing the Humidity Set-point
The standard cabinet has a humidity set-point range of 20% to 98% relative humidity.
With the purchase of an optional dryer package (DRYR301), the low end humidity range
can be extended. For information on the operation of DRYR301, refer to the
accessories section.
To set the humidity set-point, press the UP arrow to increase the humidity set-point by
1% RH. Press the DOWN arrow to decrease the humidity set-point by 1% RH.
Pressing and holding either button will cause the set-point to scroll rapidly in either
direction.
If humidity is not required in the chamber, the RH system can be disabled by turning off
the Enable Humidity switch. This will disable the entire RH system including the
controller. The system can be turned back on at anytime.
To turn off the humidity control system, but still display the chamber humidity level, press
the EZ button. The words “OFF” will display in the set-point area. To toggle back to
controlled humidity, press the EZ button again.
Humidity
Set-point
Actual
Humidity
Increase
Humidity
Set-point
Decrease
Humidity
Set-point
Enable Humidity
Control Switch
EZ Button