Ethercat out, Ethercat link indicators, Ethercat out 4.3.3.3. ethercat link indicators – ElmoMC Gold Line Digital Servo Drives-Gold Drum HV User Manual
Page 38
Gold Drum HV Installation Guide (EtherCAT and CAN)
Installation
MAN-G-DRUMHVIG-EC (Ver. 1.202)
38
4.3.3.2.
EtherCAT OUT
See Section 4.11.2 for the electrical diagram.
Pin on
EtherCAT OUT
Signal
Function
1
EtherCAT_OUT_TX+
EtherCAT out transmit +
2
EtherCAT_OUT_TX-
EtherCAT out transmit -
3
EtherCAT_OUT_RX+
EtherCAT out receive +
4/5
N/A
6
EtherCAT_OUT_RX-
EtherCAT out receive -
7/8
N/A
Pin Positions
Standard CAT5e
Ethernet Cable
Table 7: EtherCAT Out Connector Pin Assignments
4.3.3.3.
EtherCAT Link Indicators
The Gold Drum HV (High Voltage) can serve as an EtherCAT slave device. For this purpose it has
two RJ-45 connectors, which are designated as EtherCAT In and EtherCAT Out. Each of these RJ-
45 connectors has two status LEDs, which are shown in Figure 2.
Figure 2: Ethernet Connector LEDs
The green LED is the link/activity indicator. It shows the state of the applicable physical link and
the activity on that link.