Chapter 1: safety information, Chapter 1, Safety information – ElmoMC Gold Line Digital Servo Drives-Gold Drum HV User Manual
Page 8
Gold Drum HV Installation Guide (EtherCAT and CAN)
MAN-G-DRUMHVIG-EC (Ver. 1.202)
8
Chapter 1:
Safety Information
In order to achieve the optimum, safe operation of the Gold Drum HV (High Voltage) servo
drive, it is imperative that you implement the safety procedures included in this installation
guide. This information is provided to protect you and to keep your work area safe when
operating the Gold Drum HV (High Voltage) and accompanying equipment.
Please read this chapter carefully before you begin the installation process.
Before you start, ensure that all system components are connected to earth ground. Electrical
safety is provided through a low-resistance earth connection.
Only qualified personnel may install, adjust, maintain and repair the servo drive. A qualified
person has the knowledge and authorization to perform tasks such as transporting, assembling,
installing, commissioning and operating motors.
The Gold Drum HV (High Voltage) servo drive contains electrostatic-sensitive components that
can be damaged if handled incorrectly. To prevent any electrostatic damage, avoid contact with
highly insulating materials, such as plastic film and synthetic fabrics. Place the product on a
conductive surface and ground yourself in order to discharge any possible static electricity
build-up.
To avoid any potential hazards that may cause severe personal injury or damage to the product
during operation, keep all covers and cabinet doors shut.
The following safety symbols are used in this manual:
Warning:
This information is needed to avoid a safety hazard, which might cause bodily
injury.
Caution:
This information is necessary for preventing damage to the product or to other
equipment.