A three-phase direct-to-mains connection topology – ElmoMC Gold Line Digital Servo Drives-Gold Drum HV User Manual
Page 53
Advertising
Gold Drum HV Installation Guide (EtherCAT and CAN)
Installation
MAN-G-DRUMHVIG-EC (Ver. 1.202)
53
4.7.2.1.a
Three-Phase Direct-to-Mains Connection Topology
Figure 12: Non-Isolated Three-Phase Connection Topology
Caution:
•
Do not connect VN- to PE. In a direct-to-mains connection the VN- must
not be connected to the PE, as this will cause irreparable damage to the
system.
•
Take care and note that in a direct-to-mains connection the Neutral point is
not the most negative voltage level. It is the mid-point level of the rectified
DC bus.
Advertising