MTS Series 793 - Manual (Page 126)

Item Callout
Enable/Disable Change Highlighting 1
Refresh 2
Previous Change 3
Next Change 4
Print 5
1. Display the Print Preview window.
File menu > Print Preview or
Station Manager window toolbar >
2. Use the Print Preview window to preview unsaved changes that have been made to the parameter set.
• Use the Next Change and Previous Change buttons to locate unsaved changes made to the parameter
set.
• Use the Enable/Disable Change Highlighting button to highlight unsaved changes made to the parameter
set.
• Asterisks (*) identify items that have been changed since the parameter set was opened.
3. If desired, use the Station Manager application window File > Save Parameters command to save any
changes.
126 MTS Series 793 Control Software
Station Manager Application