MTS Series 793 User Manual
Page 293
Advertising
•
Warn when a specimen is beginning to fail.
•
Shut down the test before the specimen breaks.
When using error detectors, remember that:
•
Effective error detection requires a properly tuned servoloop.
•
Error limits should be set low on low-frequency and static tests.
•
Error limits should be set high on high-frequency tests.
At lower frequencies the error level is usually smaller since the feedback can track the command more closely.
Item
Callout
Error
1
Feedback
2
Test Command
3
At higher frequencies the error level is usually larger since the phase lag creates a larger error.
MTS Series 793 Control Software 293
Station Setup
Advertising