MTS Series 793 - Manual (Page 31)

Windows Explorer View of Sample Project 1
In the Sample Project shown above, the BTW, MPT, Profiles, Scope Images, and Shutdown Recorder folders
are located within the Sample Project folder (when viewed from Windows Explorer). The other folders exist
outside of the Projects directory, as specified in the Project Settings file.
Folders located inside the Project folder
A subfolder with this type of annotation means that it is located inside the Project folder. That is, the setting
for the subfolder in the Project Settings file specifies “Project” in its path.
For instance, in the Sample Project shown on the previous page, the Profiles subfolder appears in both the
Project Manager and Windows Explorer views.
Because the Profiles subfolder exists within the Sample Project folder, when you archive the Sample Project,
the files within the Profiles subfolder will also be archived.
Note:
The MPT folder includes this annotation because it contains subfolders that are specified in the Project
Settings file (Procedure and Specimen folders).
Folders located outside of the Projects folder
A subfolder with this type of annotation means that it is located outside of the Project folder. That is, the setting
for the subfolder in the Project Settings file does not specify “Project” in its path. The information in the
referenced subfolder is used to perform activities related to the Project, but is not stored within the Project.
For instance, in the Sample Project shown on the previous page, the Calibration Files subfolder appears in
the Project Manager view, but not in the Windows Explorer view. This is because the Calibration Files subfolder
does not actually exist in the Projects folder.
So, when you select the Sample Project and perform tests, your system uses calibration information stored
outside of the Sample Project folder.
MTS Series 793 Control Software 31
Project Manager