MTS Series 793 - Manual (Page 304)

Description Item
Manual Command
Use the Manual Command window to manually position the actuator
during specimen installation.
Span Setpoint
Use the Setpoint and Span window to adjust channels’ setpoints and
span.
Remote Setpoint Adjust
Use the Remote Setpoint Adjust (RSA) window to make channel and
control mode assignments to RSA knobs.
Note:
The RSA option must be selected at installation and the knobs
must be added using the Station Builder application.
Note:
Changes made to the Manual Command and Setpoint and Span settings (for example, slider-bar range
settings) can be saved with the parameter set.
About Remote Setpoint Adjust
The Remote Setpoint Adjust window assigns channels and control modes to the Remote Setpoint Adjust
(RSA) box’s control knobs. RSA allows you to remotely adjust actuators’ setpoints, away from the computer
screen.
Note:
The RSA option must be selected at installation and the knobs must be added in Station Builder.
Access
Station Controls panel toolbar >
304 MTS Series 793 Control Software
Using Station Manager to Run Tests