MTS Series 793 User Manual
Page 372
Advertising
f) Click the true strain signal (Axial True Strain).
g) Edit the Axial True Strain equation by inserting ln (1 + Axial Strain).
3. Set Fullscale Min/Max values for the Axial COD, Axial Strain, and Axial True Strain signals.
a) Click Station Signals on the Station Setup window navigation pane.
b) Click the Fullscale tab on the Station Signals window.
c) Edit the Fullscale Min/Max values and dimensions for each signal.
372 MTS Series 793 Control Software
Calculated Signals
Advertising