MTS Series 793 User Manual
Page 326
Advertising
Note:
The Function Generator does not recognize Program Hold or Program Hold Interlock, but instead goes
to Stop.
Warning:
Changes in Function Generator values made with hydraulic pressure on can result in unexpected
actuator movement.
A moving actuator can injure anyone in its path.
Always clear the actuator area before changing values.
Function Generator Control Panel
Description
Item
Selects the control channel.
Channel
Click the Channel button to toggle between individual channels and
a Master Command Group.
Selecting a Master Command Group blanks out the Control Mode
and Active Mode entries.
Sets the control mode used when the Function Generator starts.
Control Mode
326 MTS Series 793 Control Software
Using Station Manager to Run Tests
Advertising