MTS Series 793 - Manual (Page 320)

Manual Command Window
Description Item
Selects the control channel. Channel
Click the Channel button to toggle between individual channels
and a Master Command Group.
Selects a control mode. Control Mode
Select Enable Manual Command to make a selected Control
Mode the Active Mode.
Displays the current control mode. Active Mode
Applies the manual command to the actuator. Manual Cmd
If necessary, click the Manual Cmd text to display a window where
you can change the slider-bar range.
Selecting a Master Command Group that has individual channels
at different Manual Cmd values changes this control. It displays
the highest and lowest Manual Cmd values for the Group. It also
displays pointers that indicate the highest and lowest Manual Cmd
values. Pointers lock together once they have been used to move
the Group to a common Manual Cmd value.
Enables the manual command. Closing the Manual Command
window disables this command. Enable Manual Command
320 MTS Series 793 Control Software
Using Station Manager to Run Tests