MTS Series 793 - Manual (Page 324)

About the Signal Auto Offset Window
Access
Station Controls panel toolbar >
Use this window to monitor station signals and apply a software-based offset to zero signals input by
conditioners.
Signal Auto Offset Window
Description Item
Select to display lists of signals. The Channel Option window’s Signal List tab
defines the content of each list. Signal List
Displays each current signal value and offset value. Signal Value
Performs auto offset for all signals currently displayed in the window. Auto Offset
If a signal has Auto Offset Lock checked on its Offset/Zero tab on the Station
Setup window Inputs panel it will not be auto offset.
Sets the value to zero for all signals currently displayed in the window. Clear Offset
Displays only next to conditioner input signals that can be auto offset.
Click to apply a zeroing offset to the signal.
If a signal is the active feedback and the channel is running, the auto offset icon
will not be available.
Sets the value of the signal next to the button to zero.
How to Use the Rig Commands
Click one of the Rig Command buttons on the Manual Command and Station Manager window to move
enabled channels to a predefined command level. Indicators next to each command button turns green when
the channel is at the specified level.
324 MTS Series 793 Control Software
Using Station Manager to Run Tests