Rockwell Automation 1412-PP21xx PowerPad Portable Powermonitor - Manual (Page 16)

16 Rockwell Automation Publication 1412-UM001D-EN-P - September 2012
Chapter 2 Operation
When the Parameter Setup key is pressed, these setup choices appear.
1. Choose the language by pressing the function button below the chosen
language.
Your choice remains highlighted in yellow.
2. Select the configuration settings you wish to modify, with the Up/Down
Cursor buttons.
As you scroll through the choices, they are highlighted.
3. Press Enter to modify the highlighted selection.
Date / Time
Follow these steps to changes the date and time.
1. Highlight DATE/TIME by using the Up/Down Cursor buttons, then
press Enter.
2. Select the number to be modified with the Right/Left Cursor buttons (it
appears in bold type).
3. Modify the value of the number selected with the Up/Down Cursor
buttons.
4. Press Enter to apply the new settings.
ATTENTION: When CLEAR MEMORY is selected, all configurations are deleted.
TIP The date and time format used is indicated at the bottom of the screen.
This format can also be modified.
• The Date format can be set to MM/DD/YYYY or DD/MM/YYYY.
• The Time format can be set to a 12 hour clock (AM/PM) or a 24 hour
clock (military - 12/24).
DATE / TIME
CONTRAST / BRIGHTNESS
COLORS
CALCULATION METHOD
ELECTRICAL HOOKUP
CURRENT SENSORS
BAUD RATE
RECORDING
ALARM
CLEAR MEMORY
LINE FREQUENCY
07/25/02 10:26 100%
Français English Deutsch Italiano Español Portugues