Rockwell Automation 1412-PP21xx PowerPad Portable Powermonitor - Manual (Page 27)

Rockwell Automation Publication 1412-UM001D-EN-P - September 2012 27
Chapter
3
Display Modes
The screen presentations in this section depict three-phase setups for the purpose
of explaining the various choices. Your actual screens will appear differently based
upon your particular set up.
Waveform Mode
Press the waveform display mode button -
RMS Voltage Measurement on a Three-phase System
 Values measured for each waveform, updated every second, according to the
measurement type chosen with the variable function buttons. Value will be
color matched to its waveform.
 Instantaneous values of signals at time t, at the intersection of the cursor
and the waveforms. The cursor is moved along the time axis with the Left/
Right Cursor buttons.
 The measurement type is selected by using one of the six variable function
buttons. All of these measurements are valid in 3U, 3V, 3A, L1, L2, and L3.
300V
RMS
0
- 300
<t= 5.0ms V1= +276 V2= -140 V3= -145 >
3U
3V
3A
L1
L2
L3
THD CF max
min
4
1
2
3
202.5 v 202.0 v 202.7 v 1 2 3
07/25/02 49.99Hz 10:26 100%