Rockwell Automation 1412-PP21xx PowerPad Portable Powermonitor - Manual (Page 17)

Rockwell Automation Publication 1412-UM001D-EN-P - September 2012 17
Operation Chapter 2
Contrast / Brightness
Follow these steps to adjust the contrast and brightness of the PowerPad unit.
1. Highlight CONTRAST/BRIGHTNESS with the Up/Down Cursor
buttons, then press Enter.
The setting is adjusted with the Left/Right Cursor buttons and the
contrast level is indicated on the bargraph.
2. Press Enter to apply the new settings.
The Configuration menu is once again displayed on the screen.
Colors
Follow these steps to adjust the color on the PowerPad unit screen.
1. Highlight COLORS with the Up/Down Cursor buttons, then press
Enter.
This screen appears.
2. Choose the phase with the Up/Down Cursor buttons and the color for
that phase with the Left/Right Cursor buttons.
3. Press Enter to apply the new settings.
Calculation Parameters
Follow these steps to change the calculation method of the PowerPad unit.
1. Highlight CALCULATION METHOD with the Up/Down Cursor
buttons, then press Enter.
2. Select either With Harmonics or Without Harmonics with the Left/Right
Cursor buttons.
3. Press Enter to apply the new settings.
The Configuration menu is once again displayed on the screen.
Phase voltage 1 < >
Phase current 1 < >
Phase voltage 2 < >
Phase current 2 < >
Phase voltage 3 < >
Phase current 3 < >
Neutral current < >
07/25/02 10:26 100%