Rockwell Automation 1412-PP21xx PowerPad Portable Powermonitor - Manual (Page 35)

Rockwell Automation Publication 1412-UM001D-EN-P - September 2012 35
Display Modes Chapter 3
Power / Energy Mode
Press the power display mode button - .
This enables the PowerPad unit to do the following:
• Measurement of the real power (generated and consumed)
• Measurement of reactive power (capacitive or inductive)
• Measurement of apparent power
– Choice of power parameters
– Power factor
– Displays the generated or consumed energy
– Starts energy totalization
– Stops energy totalization
– Resets the counters to zero
Starting and Stopping Energy Totalization
 Start date and time of energy totalization.
 Stop date and time of energy totalization.
 Selection of the three phases (3L) or one in particular (L1, L2, L3) by
pressing the Up/Down Cursor buttons. Select  to display total for all
phases.
TIP The display is automatically adjusted for a display in W, VA, VAR or kW,
kVA, kVAR. It is possible to switch to other display modes without
stopping the totalization.
PF...
07/25/02 60.00Hz 10:49
07/25/02 10:49:21 07/25/02 10:55:08
100%
3L
L1
L2
L3
+3.241
0000203
0.241
0000021
0000000
0.120
0000011
0000000
3.809
0000244
3.796
0000336
3.452
0000306
+3.768
0000334
+3.435
0000304
kW
Wh
kVAR
vARh
kVA
VAh
W... PF... G
1.997
0000123
0000000
3
2 1
1 2 3