Rockwell Automation 1305 AC Drive, Firmware 1.01-3.00 User Manual User Manual
Page 105
Advertising
Chapter 5 – Programming
5-37
Diagnostics
This group of parameters contains values that can be helpful in explaining the operation of the drive. Drive
status, direction, control and alarm conditions are included.
[Drive Command]
Parameter # 58
[Drive Command]
Parameter Type Read Only
This parameter displays the status of the drive commands
8
ry r
Th s p r
e er d sp ys he s us
he dr ve
ds
in an 8-bit binary format.
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Run
Reverse
Decel 2
Not Used
Accel 2
Not Used
Not Used
Not Used
Advertising