Rockwell Automation 1305 AC Drive, Firmware 1.01-3.00 User Manual - Manual (Page 135)

Appendix A – Block Diagram and Specifications
A-3
Table A.1 Specifications (cont.)
ENVIRONMENTAL SPECIFICATIONS
Enclosure NEMA 1 (IP30) standard
Ambient Temperature 0 to 50 _C; Optional Enclosures: 0 to 40_C
Storage Temperature -40 _C to 70_C
Relative Humidity 0 to 95% (non condensing)
Vibration 1.0 G Operational
Cooling Method Natural Convection (no fans)
Altitude Above 1,000 m (3,300 ft), derating at 6% of drive rated amps per 1000 m
CONTROL INPUTS
Control Input Type Contact closure (Internal 5V supply)
DO NOT apply external voltage
Start
Stop
Forward/Reverse
Configurable Inputs for 2 or 3 wire control
Jog Momentary (non-maintained) Input
SW1
SW2
SW3
Configurable Inputs for control of 7 Preset speeds and 2 Accel/Decel times
Enable Interlock Input to enable drive operation
External Speed
Potentiometer 10 K Ohms, 1 Watt
Analog Input
(4 to 20mA) Input lmpedance 250 Ohms (Non-Isolated), 10 bit resolution
Analog Input
(0 to 10 V DC) Input Impedance 100 K Ohms (Non-Isolated), 10 bit resolution