Rockwell Automation 1305 AC Drive, Firmware 1.01-3.00 User Manual User Manual
Page 158
Index
I-2
Undervolt Fault, 6-8
UV Short Fault, 6-8
UW Short Fault, 6-8
VW Short Fault, 6-8
Firmware Compatibility, 1-4
Frequency Select, 5-24, 5-27, 5-28
Fusing, AC Input, 2-6
G
Grounding, 2-9, 2-11, 2-17
Group Level, 3-6
H
HIM
Control Panel, 3-1
Display Panel, 3-1
Installation, 3-4
Key Descriptions, 3-2
Removal, 3-4
HIM Modes
Control Status, 3-5, 3-14
Display, 3-5, 3-7
EEProm, 3-5, 3-10
Password, 3-5, 3-16
Process, 3-5, 3-9
Program, 3-5, 3-7
Search, 3-5, 3-13
Human Interface Module
See also HIM
Key Descriptions, 3-2
Removal, 3-4
Human Interface Module (HIM),
Description, 3-1
I
Input Devices, 2-5
Input Fusing, 2-6
Input Mode Selection, 2-15
Input Power Conditioning, 2-6
Isolation Transformer, 2-6
J
Jog, 5-25, 5-44
L
Language, 1-5, 5-32
LEDs
Direction Indicators, 3-3
Speed Indicator, 3-3
Levels
Group, 3-6
Mode, 3-6
Operator, 3-6
Parameter, 3-6
Line Reactor, 2-6
Low Line Operation, 5-36, 5-37
M
Min/Max Frequencies, 5-10
Mode Level, 3-6
Modes, Choose, 3-5, 3-6
See also HIM Modes
Motor Unbalance, 5-33
Mounting, 2-1
N
Nameplate Location, 1-4
O
Operator Level, 3-6
Output Contacts, 5-34, 5-35, A-5
Output Devices, 2-19
Output Disconnection, 2-6
Output Ratings, 1-5, A-2
Overload Protection, 5-12
P
Parameter Level, 3-6
Parameters
% Output Current, 5-7
% Output Power, 5-7
4-20mA Loss Sel, 5-21
Above Curr Val, 5-35
Above Freq Val, 5-35
Accel Mask, 5-44
Accel Owner, 5-49
Accel Time 1, 5-8
Accel Time 2, 5-25
Adapter I/O, 5-51
Advanced Setup Group, 5-15
Analog Invert, 5-21
Analog Out Sel, 5-35
Balance Angle, 5-33
Balance Freq, 5-33