Configuring the ab_eth driver – Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 106
Advertising
Publication 1756-UM051B-EN-P - November 2000
C-2 Configuring the RSLinx Ethernet Communication Driver
Configuring the
AB_ETH Driver
To configure the AB-ETH Ethernet communication driver perform the
following steps:
1. Start RSLinx.
2. From the Communications menu, select Configure Drivers. The
following window will open.
3. Click on the arrow to the right of the Available Driver Types box.
The Available Driver Types list will appear.
Advertising