Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual - Manual (Page 70)

Publication 1756-UM051B-EN-P - November 2000
6-6 Analog I/O with Direct Connection
5. This window allows you to adjust the Requested Packet Interval
(RPI) to meet your system’s requirements (for this example you
can leave it at the default 10 ms rate).
6. Click on Next to open the next page.
This page is used during online monitoring but not during initial
configuration.
.
7. Click on Next to move to the first Channel Configuration page.
The choices available on the Channel Configuration pages vary
according to the module being configured. The page below opens
for the 1756-OF8 module.