Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 42
Advertising
Publication 1756-UM051B-EN-P - November 2000
4-4 Configuring the Ethernet Module
The 1756-ENET Configuration window will open.
7. Select the Port Configuration tab.
8. Uncheck the Obtain IP Address from BootP Server box.
9. Enter the desired IP Address, Subnet Mask, and Gateway
Address. The values we used for one of the ENET/B modules in
the example applications are shown above.
10.Click on OK.
You can now move the module to another chassis and access it over
Ethernet using this configuration.
Advertising