Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual - Manual (Page 16)

Publication 1756-UM051B-EN-P - November 2000
Table of Contents ii
Chapter 4
Configuring the Ethernet Module What This Chapter Contains . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Using the Rockwell BootP Utility . . . . . . . . . . . . . . . . . . . . . . 4-1
Using RSLinx Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Using a BootP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Using DHCP Software to Configure Your Module . . . . . . . . . . 4-7
What’s Next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Chapter 5
Rack Optimized I/O About the Example Application . . . . . . . . . . . . . . . . . . . . . . . 5-1
Set Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Create the Example Application . . . . . . . . . . . . . . . . . . . . . . . 5-3
Add the Local Ethernet Module to the I/O Configuration . . 5-4
Add the Remote Ethernet Module to the I/O Configuration. 5-6
Add the Remote I/O Modules to the I/O Configuration . . . 5-8
Add the Remote Digital Input Module . . . . . . . . . . . . . 5-8
Add the Remote Digital Output Module . . . . . . . . . . . 5-10
Edit the Controller Tags . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
Create the Ladder Program . . . . . . . . . . . . . . . . . . . . . . . 5-14
Download the Program to the Controller . . . . . . . . . . . . . 5-15
Test the Example Application . . . . . . . . . . . . . . . . . . . . . . . . 5-16
What’s Next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
Chapter 6
Analog I/O with Direct Connection About the Example Application . . . . . . . . . . . . . . . . . . . . . . . 6-1
Set Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Create the Example Application . . . . . . . . . . . . . . . . . . . . . . . 6-3
Add the Remote Analog I/O Module
to the I/O Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Edit the Controller Tags . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Modify the Ladder Program . . . . . . . . . . . . . . . . . . . . . . . 6-10
Download the Program . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Test the Example Application . . . . . . . . . . . . . . . . . . . . . . . . 6-12
What’s Next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
Chapter 7
Produced and Consumed Tags About the Example Application . . . . . . . . . . . . . . . . . . . . . . . 7-1
Set Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Create the Producer Application . . . . . . . . . . . . . . . . . . . . . . . 7-3
Create the Producer Tags . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Create the Producer Ladder Program . . . . . . . . . . . . . . . . . 7-6
Download the Producer Application . . . . . . . . . . . . . . . . . 7-7
Create the Consumer Application . . . . . . . . . . . . . . . . . . . . . . 7-8
Create the Consumer Controller. . . . . . . . . . . . . . . . . . . . . 7-8
Add the Producer to the Consumer’s I/O Configuration . . . 7-9
Add the Local ENET/B Module
to the I/O Configuration . . . . . . . . . . . . . . . . . . . . . . . 7-9