Removing or replacing the module (when applicable) – Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 29
Advertising
Publication 1756-UM051B-EN-P - November 2000
Installing the Ethernet Module 2-5
Removing or Replacing the Module (when applicable)
IMPORTANT
If you are replacing an existing module with an
identical one, and you want to resume identical
system operation, you must install the new module
in the same slot.
Push on upper and lower module
tabs to disengage them.
1
Slide module out of chassis.
2
Advertising