Inserting the module in the chassis -4, Inserting the module in the chassis – Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 28
Advertising
Publication 1756-UM051B-EN-P - November 2000
2-4 Installing the Ethernet Module
Inserting the Module in the Chassis
Align the circuit board with top and
bottom guides in the chassis.
1
Slide the module into the chassis.
Make sure the module backplane
connector properly connects to the
chassis backplane.
2
The module is properly installed
when it is flush with the power
supply or other installed modules.
Circuit Board
3
Advertising