Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 107
Advertising
Publication 1756-UM051B-EN-P - November 2000
Configuring the RSLinx Ethernet Communication Driver C-3
4. Select Ethernet Devices and click on Add/New. You will be
prompted to name the driver.
5. Select the default driver name (e.g., AB_ETH-1) or type in your
own name and click on OK.
The Configure driver window will appear with the Station
Mapping page open.
6. Click on Add New and enter the IP address of your 1756-ENET/B
module (e.g., 130.130.130.2).
Advertising