Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual - Manual (Page 108)

Publication 1756-UM051B-EN-P - November 2000
C-4 Configuring the RSLinx Ethernet Communication Driver
7. Repeat step 6 for each additional Ethernet module you need to
access.
8. When you are done entering the IP addresses, click on Apply.
9. Click on OK to close the Configure driver window.
The new driver will appear in the list of configured drivers. (Your
list will display the drivers you have configured on your
workstation.)
10.Close RSLinx