Edit the controller tags -8, Edit the controller tags – Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 72
Advertising
Publication 1756-UM051B-EN-P - November 2000
6-8 Analog I/O with Direct Connection
Edit the Controller Tags
When you add modules to the I/O configuration the system creates
tags for those modules. We now need to add another Controller Tag to
modify the application program.
1. Double-click on the Controller Tags folder in the project window.
2. Note that new tags have been added for the remote analog output
module.
3. Select the Edit Tags tab at the bottom of the Controller Tags
window.
Tags for new remote
analog output module
created by the system.
Advertising