Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 52
Advertising
Publication 1756-UM051B-EN-P - November 2000
5-6 Rack Optimized I/O
Add the Remote Ethernet Module to the I/O Configuration
Next, you must add the remote 1756-ENET/B module as a “child” of
the local 1756-ENET/B module.
1. In the Project window, right click on the local 1756-ENET/B
module under the I/O Configuration folder and select New
Module from the pop-up window.
The Select Module Type window will open.
2. Select the 1756-ENET/B module from the list and click on OK.
Advertising