Create the producer application, Create the producer application -3 – Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 79
Advertising
Publication 1756-UM051B-EN-P - November 2000
Produced and Consumed Tags 7-3
Create the Producer
Application
Perform the following steps to create the producer application.
1. Start RSLogix5000. The RSLogix 5000 Main Window will open.
2. From the File menu, select New.
The New Controller window will open.
3. Enter an appropriate name for the Controller, e.g., “Producer.”
4. Select the correct Chassis Type and Slot Number for the
Logix5550 controller, and the folder where you want to save the file
(Create In).
5. Click on OK to save the project file.
Advertising