Create the example application, Create the example application -3 – Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 67
Advertising
Publication 1756-UM051B-EN-P - November 2000
Analog I/O with Direct Connection 6-3
Create the Example
Application
Perform the following steps to create the example application:
1. Start RSLogix5000. The RSLogix 5000 Main Window will open.
Open
2. Open the project file from the previous chapter (i.e.,
“Ethernet_IO_Controller”).
3. Save the file using a different name (e.g.,
“Ethernet_IO_Controller_2”).
Advertising