Add the remote digital output module -10, Add the remote digital output module – Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 56
Advertising
Publication 1756-UM051B-EN-P - November 2000
5-10 Rack Optimized I/O
5. Click on the Finish button to save the configuration.
The digital input module will appear in the I/O configuration
indented under the remote 1756-ENET/B module.
Add the Remote Digital Output Module
6. Right click on the remote 1756-ENET/B module and again select
New Module.
TIP
If you want to alter the default parameters, click on
the Next button. Refer to the ControlLogix Digital
I/O User Manual, publication 1756-6.5.8, for details.
Advertising