Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual - Manual (Page 85)

Publication 1756-UM051B-EN-P - November 2000
Produced and Consumed Tags 7-9
Add the Producer to the Consumer’s I/O Configuration
Adding the producer to the I/O configuration of the consumer
involves several steps. First, you must add the consumer’s local
1756-ENET/B module to the I/O configuration. Then you add the
remote 1756-ENET/B as a “child” of the local 1756-ENET/B module.
Finally, you add the producer as a child of the remote 1756-ENET/B
module.
Add the Local ENET/B Module to the I/O Configuration
1. Select the I/O Configuration folder in the project window and
click the right mouse button. The following pop up window will
open.
2. Select New Module.
The Select Module Type window will open.
3. Select the 1756-ENET/B module and click on OK.