Applying chassis power -7, Applying chassis power – Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 31
Advertising
Publication 1756-UM051B-EN-P - November 2000
Installing the Ethernet Module 2-7
Attach either the AUI or RJ45 connector to the matching Ethernet port.
Applying Chassis Power
IMPORTANT
Connecting the module to the network via an
Ethernet switch instead of a hub reduces the number
of collisions and lost packets and increases the
bandwidth. See the Ethernet/IP Performance and
Application Guide, publication ENET-AP001A-EN-P,
for more information.
POWER
POWER
OR
20921-M
ON
POWER
OFF
ON
POWER
OFF
Advertising