Chapter 7 (continued) – Rockwell Automation 1756-ENET/B ControlLogix Ethernet Communication Interface Module User Manual User Manual
Page 87
Advertising
Publication 1756-UM051B-EN-P - November 2000
Produced and Consumed Tags 7-11
Add the Remote ENET/B Module to the I/O Configuration
Next, you must add the remote 1756-ENET/B as a “child” of the local
1756-ENET/B.
1. In the Project window, right click on the local 1756-ENET/B
module under the I/O Configuration folder and select New
Module from the pop-up window.
The Select Module Type window will open
2. Select the 1756-ENET/B module and click on OK.
Advertising