Read io config method – Rockwell Automation 1746-INT4 Thermocouple/MV Isolated/ User Manual User Manual
Page 42
Advertising
Publication 1746-UM614B-EN-P - September 2007
42 Access Files to Configure I/O
The I/O Configuration is now complete. Each slot shows the
corresponding module that is located on the rack. In this
example, 1746-INT4 is in slot 1.
Read IO Config Method
Follow these steps to configure the SLC chassis by using the read I/O
configuration method.
1. Double-click the menu item to open the IO Configuration menu
in the RSLogix 500 software.
Advertising