Rockwell Automation 1746-INT4 Thermocouple/MV Isolated/ User Manual User Manual
Page 78
Publication 1746-UM614B-EN-P - September 2007
78 Application Programming Examples
TO BCD
Source
I:1.0
Dest
O:3.0
TOD
TO BCD
Source
I:1.1
Dest
O:4.0
TOD
TO BCD
Source
I:1.2
Dest
O:5.0
TOD
TO BCD
Source
I:1.3
Dest
O:6.0
TOD
END
address 15 data 0 address 15 data 0
N10:0 0000 1101 0000 0010 N10:5 0000 1100 0000 0000
N10:1 0000 1101 0000 0000 N10:6 0000 1100 0000 0001
N10:2 0000 1101 0000 0001 N10:7 0000 1100 0000 0000
N10:3 0000 1101 0000 0000 N10:8 0000 1101 0000 1111
N10:4 0000 1100 0000 0010 N10:9 0000 1100 0000 1111
Rung 2.8
Convert data words to BCD format and send them to the LED indicator displays.
Write Ambient or Cabinet
Temperature to the Display
Rung 2.9
Rung 2.10
Rung 2.11
Rung 2.12
Write Bath Temperature
to the Display
Write Steam Temperature
to the Display
Write Chilled Temperature
to the Display
Data Table