Rockwell Automation 1746-INT4 Thermocouple/MV Isolated/ User Manual User Manual
Page 46
Advertising
Publication 1746-UM614B-EN-P - September 2007
46 Channel Configuration, Data, and Status
The configuration word default settings are all zero. Next, we describe
how you set configuration bits of a channel configuration word to set
up the following channel parameters:
•
Type of thermocouple or mV input
•
Data format, such as engineering units, counts, or scaled for PID
•
How the channel should respond to a detected open input
circuit
•
Temperature units in °C or °F
•
Whether the channel is enabled or disabled
Advertising