Rockwell Automation 1746-INT4 Thermocouple/MV Isolated/ User Manual User Manual
Page 43
Advertising
Publication 1746-UM614B-EN-P - September 2007
Access Files to Configure I/O 43
2. Place the 1746-INT4 module into the correct slot by clicking
Read IO Config.
The following screen appears.
3. Select either the driver and processor node number or click Who
Active to browse for the device.
•
If you selected the driver and node number, proceed to step
5.
•
If you clicked Who Active, the following screen appears.
Advertising