Rockwell Automation 1746-INT4 Thermocouple/MV Isolated/ User Manual - Manual (Page 44)

Publication 1746-UM614B-EN-P - September 2007
44 Access Files to Configure I/O
The Who Active screen lets you to browse for the SLC device.
4. Locate the SLC chassis under the appropriate driver and click
OK.
You return to the Read IO Config dialog.
5. Click Read IO Config and the rack is populated automatically.
The I/O Configuration is now complete. Each slot shows the
corresponding module that is located on the rack. In this
example, the 1746-INT4 is in slot 1.